S-Band Distributed 3-Port Isolator Assembly, 8 MW Peak Power, 8 KW Average Power
S-Band Distributed 3-Port Isolator Assembly
8 MW Peak Power, 8 KW Average Power
Model #102647A
Unit Specifications
| Peak Power | 8 MW | Center Frequency | 2.998 GHz |
|---|---|---|---|
| Average Power | 8 KW | ||
| Flanges | CPR284F | VSWR (Port 1) | 1.10 max |
| Water Flow | 3 GPM (minimum) | ||
| Required Water Treatment | Deionized Water | ||
| Water Temperature | 35º to 40ºC (tested & optimized @ 38ºC ) |
Isolation (Port 2 to Port 1) |
>33 db |
| Gas Pressure | 35 PSIG SF 6 | ||
| Length | 19.5" (495 mm) | Insertion (Port 1 to Port 2) |
<0.30 db |
| Weight | 24 lbs. (10.9 Kg) | ||
| Probe Connector | Type N Female |
Overview
This Isolator Assembly consists of the EM Design Distributed 3-Port Circulator, four adjustable E-field couplers and an EM Design Waterload, Model #R284-3.0.
The straight input Port 1 is on the left and the output Port 2 is shown on the right side of the photograph. The power reflected at Port 2 is absorbed by the load on Port 3.
The high power S-band circulator is based on EM Design’s unique patented concept and is especially attractive for isolating reflection from resonant loads such as accelerators or other similar devices. This isolator assembly is set for the 2.998 GHz frequency, but can be readily optimized for other frequencies, including 2.856 GHz. Note that the power input, Port 1, and terminated Port 3, has two variable insertion E-Field probes (at each port) for monitoring and/or control signals. These probes can be adjusted from the nominal 60 db coupling. Water cooling is connected in series so that the flow is conveyed through the circulator and the attached load.
This model and Model #102647 are equal in performance but provide different orientations of Port 1.
Patent No. 6,407,646